Emerson Avocent LongView IP KVM Extenders - Digital Extension Solutions Guide De Montage

32        LongView® IP KVM Extenders Installer/User Guide

9. Press 

to select the Network Speed option to toggle between Auto-Negotiate mode (option 1) 

or 100Base TX full duplex mode (option 2).

10. Type 

 (zero) and press 

 to exit and apply changes, or to return to the Network 

Configuration Menu. If you made a mistake and do not wish to save the changes you made to 
the network settings, type 

 and press 

. 

NOTE: Changes to network configurations are applied only after you exit the Network Configuration Menu.

The LongView IP KVM user station will now automatically reset to apply the new network 
configuration. During reset, the LongView IP KVM user station will drop its connection to the 
transmitter. You will be returned to the Appliance Selection Menu screen. The connection will be 
restored.

NOTE: The currently selected network speed, Auto-Negotiate, is marked with an asterisk.

In the event that you forget the IP address of a transmitter, you can use the serial menu to detect the 
IP address of a transmitter that is connected to the LongView IP KVM user station.

NOTE: This can only be done if the transmitter has been assigned a static IP address.

1. Turn off the transmitter and directly connect it to the user station. 

NOTE: If the transmitter receives its power from an external power supply, disconnect the transmitter from that 
external power supply.

2. Press 

 to access the Receiver Main Menu and press 

. If the password option is enabled, 

you will be prompted for a password.