Eiki/Elf EIP-4500 Manuel D’Utilisation
24
Confirming the Projector
Status
Status
(Status)
On this screen, you can confirm the projector
status. You can confirm the following items :
status. You can confirm the following items :
•••••
MAC Address
•••••
Power
•••••
Condition
•••••
Lamp Timer 1
•••••
Lamp Timer 2
•••••
Lamp Life 1
•••••
Lamp Life 2
•••••
Input
•••••
Signal Info
Note
• If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be dis-
played. Wait for a moment and then oper-
ate again.
message (“Server Busy Error”) will be dis-
played. Wait for a moment and then oper-
ate again.
• For details about each item, refer to the
owner’s manual of the projector.
Controlling the Projector via LAN
Controlling the Projector
(Control)
On this screen, you can perform projector con-
trol. You can control the following items :
trol. You can control the following items :
•••••
Power
•••••
Input Select
•••••
Volume
•••••
Mute (Audio) [OFF] [ON]
•••••
Black Screen [OFF] [ON]
Note
• If you click the “Refresh” button before the
screen is displayed completely, an error mes-
sage (“Server Busy Error”) will be displayed.
Wait for a moment and then operate again.
sage (“Server Busy Error”) will be displayed.
Wait for a moment and then operate again.
• You cannot operate this page while the pro-
jector is warming up.
• While the projector is in standby mode, you
can only control “Power ON”.
• For details about each item, refer to the
owner’s manual of the projector.