EE Brightbox Manuel D’Utilisation
EE Bright Box User Manual
158
Description of DMZ settings
The table below contains a description of the settings on the DMZ page:
Section
Description
No.
This field is the index for the router DMZ entry.
Public IP Address
This field is used to configure the public (Internet) IP
address of the DMZ entry. Index number 1 cannot be
configured, but will always reflect the current
Internet IP address assigned to the router.
Index numbers 2 – 8 allow you to configure manual
public IP addresses for the DMZ. These entries must
be unique, and not match another entry in the list.
They are suitable if you have multiple static IP
addresses and are not supported for EE Broadband
users.
address of the DMZ entry. Index number 1 cannot be
configured, but will always reflect the current
Internet IP address assigned to the router.
Index numbers 2 – 8 allow you to configure manual
public IP addresses for the DMZ. These entries must
be unique, and not match another entry in the list.
They are suitable if you have multiple static IP
addresses and are not supported for EE Broadband
users.
Client IP Address
This field is used to configure the IP address of the
device or computer on your local network that you
are putting inside the DMZ, to allow incoming and
outgoing traffic to be unimpeded by the firewall.
It is recommended that you create a reserved IP
address in the DHCP page for any computer you
device or computer on your local network that you
are putting inside the DMZ, to allow incoming and
outgoing traffic to be unimpeded by the firewall.
It is recommended that you create a reserved IP
address in the DHCP page for any computer you