CyberHome Entertainment CH-RDV 2000 Manuel D’Utilisation

32

This unit can make duplicates of most disc types, excluding DVD, SVCD and VCD discs, with capacities up to 700MB. 
When copying a disc, make sure the destination disc is of a large enough capacity and blank. 

Insert the SOURCE disc you would like to copy into the DVD-
ROM drive. If the disc auto-plays, press the STOP button twice 
to completely stop play. Press the BURNER button on the 
Remote Control to enter the On-Screen Burner Interface. The 
following example shows how the Burner Interface may look 
with an Audio CD inserted:

Use the RIGHT ARROW key to move to the icons at the bottom of the 
screen. The RIGHT and LEFT ARROW keys are used to navigate to 
an icon. Choose the Open / Close icon       and press ENTER. 

Individual files will not be 
listed with Data CDs, such 
as program discs. 

Notice that the Disc Space 
Indicator at the bottom of 
the screen shows FULL, 
since there is no disc, 
hence no space available. 

Insert a CD-R or CD-RW disc in the CD-RW drive. Press ENTER again to close the tray. 
Notice the Disc Usage and Disc Type indicators at the bottom of the screen. The Disc Type 
indicator appears to the left of the icons and indicates the type of disc and amount of free 
space. The Disc Usage Indicator appears at the very bottom of the screen and gives a 
graphical representation of the amount of disc space used. For a Disc Copy, the destination 
disc must be blank - the Disc Usage Indicator should be completely white as shown below: 

Ÿ If a CD-RW disc is being used as the 

START COPY ?

Use the RIGHT ARROW key to select the Disc Copy 
Icon         and press ENTER to start the operation. 
You will be prompted to confirm the operation or 
cancel as shown to the left. Choose the CHECK 
MARK to begin, or the X to cancel.