Crucial SK01 Manuel D’Utilisation
7. Connect the drive bay power cable adapter to the power cable inside the case (Pic A). Connect the drive
bay SATA cable to the SATA slot on the motherboard (Pic B).
bay SATA cable to the SATA slot on the motherboard (Pic B).
8. Insert the 2.5-inch external enclosure (Pic A) into the 3.5-inch drive bay within the 5.25-inch bracket
until they are firmly connected. The eject button on the 3.5-inch drive bay will pop out when the
2.5-inch external enclosure is fully inserted (Pic B).
until they are firmly connected. The eject button on the 3.5-inch drive bay will pop out when the
2.5-inch external enclosure is fully inserted (Pic B).
9. Turn on the computer power; when the system starts up, the operating system should recognize
a new disk drive. If the system does not recognize the drive, contact technical support at
a new disk drive. If the system does not recognize the drive, contact technical support at
www.crucial.com/support.
NOTE: The SATA drive is hot-swappable if the motherboard supports this feature; otherwise, the connection
must be made when the power is off. Check with your motherboard or system manufacturer for more
information.
NOTE: The SATA drive is hot-swappable if the motherboard supports this feature; otherwise, the connection
must be made when the power is off. Check with your motherboard or system manufacturer for more
information.
10
A B
A B