CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

 
 

                                                                 

 

31 

This section covers how to create, display, modify, or delete the line profile 
and alarm profile by selecting DSL Line Configuration from EmWeb Menu. 
This section will cover all the function from DSL Line Configuration Menu. 

This section describes how to create an ADSL line profile. 

1. Click on “Create Line Profile” of DSL Profile configuration Menu. 

The Create Line Profile screen appears as follows: 

 

Table 3-3    Create Line Profile Field Definitions 

 
 
 
 
 
 
 
 
 
 
 

2. Configure the name of line profile, say service512K64K. 

3. Configure the line profile on CO side (Down Stream). For example,   

4. Configure the line type, transmit rate adaptation, target SNR margin, 

minimum transmit rate, maximum transmit rate, and interleave delay as 

Field Definition 
Line Type 

The ADSL line type, Fast or Interleaved 

Transmit Rate 
Adaption 

Defines what form of transmitting rate to be 
adaptated, fixed or adaptAtStartup 

Target Snr Margin (db) Target Signal / Noise Margin. 
Minimum Transmit 
Rate 

The minimum transmitting rate of ATU-C side or 
ATU-R side. 

Maximum Transmit 
Rate  

The maximum transmitting rate of ATU-C side or 
ATU-R side. 

Interleave Delay 
(mili-seconds) 

The value of Interleave Delay for this channel.