CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

 
 

                                                                 

 

39 

Routing Table is a matrix with a network control protocol, which gives the 

hierarchy of link routing at each node.   

The Routing Table screen allows you to view the routing table built in the ADSL 

IP DSLAM and modify them. The procedures are as follows: 

1. Click on “List of Subscriber” of the Port configuration Menu. The Routing 

Table screen appears with the default setting as follows: 

 

   

2. Configure the Port No. (1~16), Name, Destinations and Subnet mask 

separately, and then click on the Apply button. 

3. The newly added routing node will be listed in the routing table. If to delete 

one routing node, click on the Delete.  

Note: only can the routing table be configurable, when the RFC-1483 mode is 

configured as “Route”. Please refer to the setting in the PVC 
Configuration, page 36.