CTC Store IPDSLAM-A8/A16 Manuel D’Utilisation

 
 

                                                                 

 

82 

Example: This example shows how to configure the VPI-0, VCI-50, up 

Administration status, enable VLAN tag with VLAN ID-4002 and highest 
connection priority on port 8. 

IPDSLAM # add connection 8 0/50 up b 4002 7 
Port 8 
PVC: 0/50 
AdminStatus: up 
VID: 4002 
rfc1483 b<ridge>|r<oute>: b 
Priority: 7 
yes or No <y/n>? 

This example shows how to configure the VPI-0, VCI-50, up Administration 

status, and without VLAN tag on port 8 of unit 1 

IPDSLAM # add connection 8 0/50 up   
Port 8 
PVC: 0/50 
AdminStatus: up 
yes or No <y/n>? 

Note:  

(1) Virtual Connection can be configured up to 2 connections on the same port 

but the VLAN ID can not overlap with the existing VLAN ID. 

(2) The default setting for PVC is 8/81, and you can modify and delete the 

default setting. 

(3) The default setting of VLAN ID is without VLAN tag. 

(4) On the same port, one PVC or two PVCs can be created. On the creation of 

one PVC, the configuration of VLAN ID can either be enabling VLAN tag or 
disabling VLAN tag. On the creation of two PVCs, the configuration of 
VLAN ID can either be enabling both VLAN tags or just disabling VLAN tag 
on a PVC whereas the other will remain with VLAN tag. The situation of 
both PVC without VLAN tag cannot be configured. Please refer to the table 
4-13 for understanding ways of PVC configuration either with VLAN tag or 
without VLAN tag: 

 

Table 4-14    Ways of PVC configuration either with VLAN tag or without VLAN tag 

Port 1

st

 PVC 

  2

nd

 PVC 

  With VLAN tag 

With VLAN tag 
Without VLAN tag 

The same 
port 

  Without VLAN tag 

With VLAN tag