Craftsman CM 14 INCH CHOP SAW Manuel Du Propriétaire
6
7
6
7
CHOP SAW SAFETY
BEFORE USING THE CHOP SAW,
IT IS CRITICAL THAT YOU READ
AND UNDERSTAND THESE SAFETY
RULES.
TO AVOID MISTAKES THAT COULD
CAUSE SERIOUS OR PERMANENT
INJURY, DO NOT PLUG IN THE
CHOP SAW UNTIL THE FOLLOWING
INSTRUCTIONS HAVE BEEN READ
AND UNDERSTOOD.
1. Learn the function of the ON/OFF
switch, cutting handle and wheel
guard.
2. Review and understand all safety
instructions and operating procedures
in this Operator’s manual.
3. Review the maintenance methods
for this chop saw.
4. Find and read all the warning labels
on the chop saw:
● Read manual before using the
chop saw.
● Wear safety goggles.
● Never perform cutting operations
with wheel guard removed.
● Turn power OFF, wait for abrasive
wheel to stop and remove power
cord from power source before
adjusting or servicing.
5. The arbor bolt and all clamps have
to be tightened before cutting.
6. Make sure the workpiece and the
abrasive wheel are not in contact
prior to operating the saw.
WHEN INSTALLING OR MOVING
YOUR CHOP SAW:
1.
AVOID A DANGEROUS
ENVIRONMENT:
● Use the chop saw in a dry,
indoor location protected from
rain and moisture.
● Keep work area well lit.
2.
TO AVOID INJURY FROM
UNEXPECTED CHOP SAW
MOVEMENT:
● Bolt or clamp the chop saw to
a firm level surface where there
is plenty of room to move the
workpiece through the entire cut.
● Position the chop saw so the
feet are level and the chop saw
does not rock.
● Position the chop saw where
operators and bystanders stand
a safe distance away from the
saw and are not in direct line
with the cutting wheel.
● To avoid injury from electrical
shock, make sure your fingers
do not touch the plug’s metal
prongs when plugging in or
unplugging the chop saw.
● Turn OFF and unplug the chop
saw before moving it to a new
area. To avoid back injury, get
help when transporting.
● Bolt the chop saw to the floor if
it tends to move when cutting
long, heavy workpieces.
● DO NOT STAND ON the chop
saw. Do not store materials
above or near it. Standing on
the tool could result in serious
injury.
WARNING
!