Funai FDP-100 Manuel D’Utilisation
37
Appendix
[ERROR] Lamp
The [ERROR] lamp lighting indicates the following
probable causes.
probable causes.
About the paper:
z
Paper jam has occurred.
z
The Paper tray is not set.
z
There is no paper in the Paper tray.
z
Specified paper is not set in the Paper tray. (Set the
paper supplied with the Ink cartridge.)
paper supplied with the Ink cartridge.)
About the Ink cartridge:
z
The Ink cartridge is not set.
z
The Ink ribbon in the Ink cartridge has been
consumed.(The [ERROR] lamp flashes.)
consumed.(The [ERROR] lamp flashes.)
Other paper errors
z
More than 2 sheets of paper are sent inside
of the printer at a time as the paper sticks
together and like that. Turn off the printer and
turn on again, so the paper is discharged
from the printer.
of the printer at a time as the paper sticks
together and like that. Turn off the printer and
turn on again, so the paper is discharged
from the printer.
z
Paper jam has occurred. Turn off the printer
and turn on again, so the paper is discharged
from the printer.
and turn on again, so the paper is discharged
from the printer.
File error
z
The printer failed to get DPOF setting
information. Check if the DPOF settings are
correctly configured.
information. Check if the DPOF settings are
correctly configured.
z
An image that is not supported by the printer
is tried to be printed.
is tried to be printed.
-
Monitor Display Examples
Status of the Printer/Solution
Page
POWER
POWER
ACCESS
ACCESS
ERROR
ERROR