Funai TB110MW9 Manuel D’Utilisation
20
EN
Advanced Operation
Operation
Adjusting Antenna
You can verify the signal strength of each channel.
1 Select a channel to adjust using [the
Number buttons] or [CH
K / L ].
2 Press
[SETUP].
3 Select
“CHANNEL”
using [
K / L ],
then press [OK].
4 Select “ANTENNA” using [
K / L ],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
ADD/DELETE
RF OUT
•
STB starts receiving the signal for the
channel.
channel.
5 By
referring to the on-screen
indication, adjust the antenna’s
direction to get the best reception.
direction to get the best reception.
WEAK
STRONG
NOW
10
PEAK
50
ANTENNA
EXIT
CHANNEL
TIME
DETAIL
INITIAL
10.1
BACK
Status bar:
Stretches to the right as the signal
strength gets stronger.
Stretches to the right as the signal
strength gets stronger.
Peak indicator:
Indicates the highest strength ever
reached.
Indicates the highest strength ever
reached.
To adjust other channels:
Select the channel using [CH
K / L ], then adjust it.
6 Press
[SETUP] to exit.
Selecting Display Mode
You can adjust the aspect ratio of the digital TV
program to fi t your 4:3 TV monitor.
program to fi t your 4:3 TV monitor.
Display Mode
1 Press
[SETUP].
2 Select
“DETAIL”
using [
K / L ], then
press [OK].
SETUP
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
V-CHIP
4 HOURS
LETTERBOX
3 Select “DISPLAY MODE” using [
K / L ],
then press [OK].
DETAIL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
4 HOURS
LETTERBOX
V-CHIP
4 Select the desired display mode
using [
K / L ], then press [OK].
*
Descriptions of each settings are explained
in the “Information on Display Mode” on the
next page.
in the “Information on Display Mode” on the
next page.
Select display mode.
ZOOM
FULL
LETTERBOX
5 Press
[SETUP] to exit.
X6043UD_TB110MW_v3.indd 20
X6043UD_TB110MW_v3.indd 20
2010/08/31 11:24:22
2010/08/31 11:24:22