Corega CG-WLNCM4G Manuel D’Utilisation
26
Advanced Settings
3.2 Network
3.2.1 Network
If you have set up your network in Smart Wizard, here you can change
more detailed settings. If you did not use Smart Wizard previously, it is
okay to set up the network completely here.
more detailed settings. If you did not use Smart Wizard previously, it is
okay to set up the network completely here.
IP Setting:
• DHCP: Select this option when your network uses the DHCP server,
such as a NAT router. When the camera starts up, it will be assigned
an IP address from the DHCP server automatically.
• Static IP: Select this option to assign an IP address for the camera
directly. You may use NC Finder to obtain the related setting values.
• PPPoE: Select this option when you use a direct connection via an
ADSL modem. You should have a PPPoE account from your Internet
such as a NAT router. When the camera starts up, it will be assigned
an IP address from the DHCP server automatically.
• Static IP: Select this option to assign an IP address for the camera
directly. You may use NC Finder to obtain the related setting values.
• PPPoE: Select this option when you use a direct connection via an
ADSL modem. You should have a PPPoE account from your Internet