Fujitsu 8000 SERIES Manuel D’Utilisation
41
●
Installing memory modules
1
Disconnect the power plug from the outlet.
2
Remove the side cover.
Confirm that the memory power LED is off. If the memory power LED is on, disconnect the
power cable from your PC before preceeding.
power cable from your PC before preceeding.
3
Remove the bracke.
4
Remove the duct.
Remove the two screws.
5
Open the hook on both sides of the slot outward to remove the memory module.
Point
•
Do not open the hooks too violently. Otherwise, the memory module may jump out of the slot
and become faulty.
and become faulty.
•
Keep the removed continuity module in a safe place.
06-DP8 (34-42)
3/2/01, 2:32 PM
41