Fujitsu 8000 SERIES Manuel D’Utilisation
53
6
Connect flat cables.
•
When connecting an IDE-compliant internal option
The connector of the secondary IDE cable, which is marked “To the motherboard” in the
figure below, is connected to the secondary IDE connector in the PC unit.
figure below, is connected to the secondary IDE connector in the PC unit.
Connect components as follows to the master and slave connectors:
< Secondary IDE cable (40 pins)>
SLAVE
MASTER
Pin 1 Red line
Connect the option here
to configure it as a slave.
to configure it as a slave.
Connect the option here to
configure it as the master.
configure it as the master.
To the
motherboard
motherboard
Master
Slave
CD-ROM only
CD-ROM
—
Hard disk + CD-ROM
Hard disk
CD-ROM
Magneto-optical disk + CD-ROM
Magneto-optical disk
CD-ROM
08-DP8 (51-56)
3/2/01, 2:32 PM
53