Fujitsu 2300 Manuel D’Utilisation

3-6

Care and Maintenance

2. Remove the battery from the pen barrel.

3. Observing the polarity mark, insert a new battery into the pen barrel. (Insert the

end of the battery with the negative terminal first.)

Note:

You do not need to remove the spring from the pen barrel when you replace the
battery; however, if the spring does come out of the pen barrel when you remove the
battery, insert the spring into the pen barrel, as shown in Figure 3-2, before you
insert the new battery. Close the pen by twisting the pen barrel clockwise until it is
snug. In order to avoid damage to the pen, do not overtighten it.

You can now use the pen as you normally would.

You can obtain replacement AAAA batteries from your local battery reseller or order
directly from the following sources:

• Bay Battery (800) 680-1993

Duracell product number MN2500

• Eveready Battery Company, Inc. (800) 383-7323

Eveready model number E96

Calibrating the Pen

You calibrate the pen to adjust the cursor position on the screen relative to the
position of the pen. If the cursor is not displayed under the pen tip when you use the
pen, you should calibrate the pen.

Pen calibration may be required due to the following situations:

• The previous user of the Stylistic 2300 pen tablet writes with the opposite hand.

• The system has been in use for some time and the pen has not been recalibrated.

• You have rotated the screen from landscape (wide) to portrait (tall) orientation, or

from portrait to landscape orientation. (Note that rotating the screen does not
affect pen calibration, however, changing the screen orientation may cause you to
hold the pen tablet and pen in a slightly different position.)