British Telecom Converse 2100 040206 Manuel D’Utilisation
Codes de produits
040206
If you experience any problems, please visit www.bt.com/producthelp
10
10
Each number can be up to 32 digits long and can
include a pause or #.
If you enter more than 32 digits you will hear an
If you enter more than 32 digits you will hear an
error beep.
You can store your 3 most frequently used phone numbers on the one-touch memory
buttons (
buttons (
,
and
) and dial them by pressing a single button.
Store/replace a one touch number
1. Lift the handset, or press
, to get a line.
2. Press and hold the
,
or
button you want until you hear a
beep and the Secrecy light flashes.
3. Enter the number you want to store.
4. Press the same
,
or
button to confirm. The number is
stored. You hear a confirmation beep.
Dial a one-touch memory number
1. Lift the handset, or press
, then press the one-touch button you want.
The stored number is dialled.
Storing a pause in a number
A pause is normally inserted in a stored telephone number after a switchboard
access code (e.g. 9) to allow the switchboard time to get an outside line before
the number is dialled. For example,
access code (e.g. 9) to allow the switchboard time to get an outside line before
the number is dialled. For example,
9 – Pause – 08702405522
.
1. To enter a pause, press
in the appropriate place when storing the number.
Delete a stored number
1. Lift the handset, or press
, to get a line.
2. Press and hold the
,
or
button you want until you hear a
confirmation beep and the Secrecy light flashes.
3. Press
to delete the stored number. You hear a confirmation beep.
4. Replace the handset or press
.
M1 – M3 memory buttons
To enter a pause when storing a number
press
.
To cancel while storing, hang up the handset
or press
. Any number already stored
will be kept.