British Telecom Converse 2100 040206 Manuel D’Utilisation

If you experience any problems, please visit www.bt.com/producthelp

5

5

Do not place your BT Converse 2100 in the 

bathroom or other humid areas. 
Other electrical equipment close to your 

Converse could have an adverse effect on call 

quality. If you experience buzzing during a call 

try moving the Converse away from any electrical 

equipment that may be nearby.

You need to place your BT Converse 2100 within 3 metres of a telephone socket 
so that the cable will reach. Your BT Converse 2100 can be wall mounted, 
see ‘Wall mounting your phone’ on page 14.

Setting up

1.  Plug the end of the telephone line cord into the telephone wall socket.

2.  Check that the dialling 

 switch on the underside of the base is set to 

 for tone dialling with timed break recall.

3.  Fit the desk mounting plinth if required by positioning the plinth over the lugs 

and pushing it down into place, as shown by the blue arrows.

Your BT Converse 2100 is now ready for use.

Getting started

If connecting to a switchboard you may need to 

adjust the dialling mode setting to P or T using 

the Mode switch on the underside of the base.  

If in doubt, please consult your service provider.

Only use the handset and line cord supplied or 

this product may not work.