Contax U4R Manuel D’Utilisation
EN-173
3
Move the selector lever up u to select
[SINGLE], then press E.
4
Move the selector lever left l or right r
to select the center location, then move
the lever down d.
The image selection screen appears showing the still images stored on
the memory card.
the memory card.
5
Move the selector lever left l or right r
to select an image and press E.
A message appears asking you to confirm the image setting.
6
Move the selector lever up u to select
[SET], then press E.
The selected image is stored in the internal camera memory.
The user-defined screen setting is set and the startup screen is
displayed for 1 second, and then the SET UP menu screen reappears.
The user-defined screen setting is set and the startup screen is
displayed for 1 second, and then the SET UP menu screen reappears.
B
Note
If you select [RESET], the reset confirmation
message appears. Select [EXECUTE] and press
E to delete the user-defined screen set previously
from the camera's memory.
message appears. Select [EXECUTE] and press
E to delete the user-defined screen set previously
from the camera's memory.
B
Note
• This setting is retained when you turn the camera off.
• Because the selected images are stored in the camera's memory, switching memory
• Because the selected images are stored in the camera's memory, switching memory
cards or erasing the image from the memory card does not affect the images shown in
the startup screen.
the startup screen.
MULTI
SINGLE
OFF
SELECT START SCREEN
RESET
SELECT START SCREEN
SELECT IMAGE
OK
0001/0051
SELECT IMAGE
OK
SET
CANCEL
APPLY SETTINGS?