Freescale Semiconductor 802.15.4 Manuel D’Utilisation

 

6-4                    Embedded Bootloader Reference Manual, Rev 0.0              Freescale Semiconductor 

This section describes the source files. 

The user must define the PCB target specific #defines in the 

Target.h

 in the 

.\802.15.4_Headers\Ghdr

. file for a successful port. 

Several other #defines are made in the target description in target.h. The 
#defines are used by the 802.15.4 MAC/PHY build. The listed #defines 
are the ones which must (also) be defined for the Embedded Bootloader: 

Example for the Freescale TARGET_DIG528_2 and TARGET_DIG536_2: 

MC13192 reset pin connection: 

#define HWAssertAbelReset        PTCD &= ~0x10;    // Reset = 0; 

#define HWDeAssertAbelReset      PTCD |=  0x10;    // Reset = 1; 

Optional for Safe Mode Boot indicator function (LED pin connections): 

#define LED1ON  PTDD &= 0xFE; 

#define LED1OFF PTDD |= 0x01; 

#define LED1TOGGLE PTDD ^= 0x01; 

 

#define LED2ON  PTDD & = 0xFD; 

#define LED2OFF PTDD | = 0x02; 

#define LED2TOGGLE PTDD ^ = 0x02; 

 

#define LED3ON  PTDD & = 0xF7; 

#define LED3OFF PTDD | = 0x08; 

#define LED3TOGGLE PTDD ^ = 0x08; 

 

#define LED4ON  PTDD & = 0xEF; 

#define LED4OFF PTDD | = 0x10; 

#define LED4TOGGLE PTDD ^ = 0x10; 

 

The MC13192 attention and reset pin (bit) positions: 

#define ABEL_ATT_PIN     

(1<<2) 

#define ABEL_RESET_PIN  (1<<4) 

 

HCS08 port setup macros: 

#define  mSETUP_PORT_A  //PTAPE = 0x3C;\