Fostex 8360 Manuel D’Utilisation
There are two types for connecting the recorder to a personal computer using the LAN cable; one to one
connection and LAN connection. The following describes how to make connection for each type.
connection and LAN connection. The following describes how to make connection for each type.
Connecting to a personal computer
1
2
3
4
5
5
6
7
8
1
2
3
4
5
5
6
7
8
One to one connection
To connect the recorder to a personal computer on a "one to one" basis, use a "cross cable of category 5 or
higher" for connection between the recorder and a personal computer, as shown below.
To use the ether card as an FTP server, see "TCP/IP setting (recorder's initial setting)" and "Personal com-
puter setting" described later.
higher" for connection between the recorder and a personal computer, as shown below.
To use the ether card as an FTP server, see "TCP/IP setting (recorder's initial setting)" and "Personal com-
puter setting" described later.
Cross cable of category 5 or higher
D2424LV/D2424 with the ether card
Personal computer with an FTP application installed
<Note>
A personal computer must be equipped
with a LAN card which works correctly.
with a LAN card which works correctly.
3