CNet Technology CWR-800 Manuel D’Utilisation

The status of the DDNS service connection is displayed here. 

 
To save your changes on this page, click the Apply button. To cancel any unsaved changes on 
this page, click the Cancel button. To get more information about the features, click the Help 
button. 
 

 

The SNMP tab, allows you to customize the Simple Network Management Protocol (SNMP) 
settings. SNMP is a popular network monitoring and management protocol. 
 

 
The Identification settings let you designate the Contact, Device Name, and Location information 
for the Router. The SNMP Community settings allow names to be assigned to any SNMP 
communities that have been set up in the network. You can define two different SNMP 
communities, with the default names being Public and Private. 
 
SNMPv2. 

To enable the SNMP support feature, select Enable. 

In the Contact field, enter contact information for the Router. In the Device Name 

field, enter the name of the Router. In the Location field, specify the area or location where the 
Router resides. 
 
SNMP Community. 

You may change the name from its default, Public. Enter a new name in the 

field. Then configure the community's access as either Read-Only or Read-Write. You may 

change the name from its default, Private. Enter a new name in the Private field. Then configure 
the community's access as either Read-Only or Read-Write. 
 
When you’ve completed making any changes on this tab, click the Apply button to save those 
changes or Cancel to cancel your changes. For more information on this tab, you can click the 
Help 

button.