ClassicFlame 45EB424GRS Manuel D’Utilisation

Figure  3

E-5

SECTION 4: OPERATION

TO ACCESS CONTROL PANEL-

Open the front glass

doors, then slide the mesh curtains to the sides. Lift the

hinged door that covers the control panel (figure 3).

MAIN POWER-

 The MAIN POWER button supplies 

power to all of the functions of the fireplace. This 

button must be in the ON position for any of the 

functions to work including the remote.

HEATER-

 The Heater button supplies power to the 

heater and blower. If a wall thermostat (not included) 

is installed, the MAIN POWER button must be ON, 

then the temperature can be controlled by the wall 

thermostat.

FLAME-

 Each time the FLAME button is pressed, the 

intensity of the flame decreases. There are five 

brightness levels you can cycle through including the 

OFF setting. This function can also be controled with 

the remote control.

DOWNLIGHT-

The DOWNLIGHT button switch turns

on the downlights that illuminate inside the firebox. 

This function can also be controlled with the

remote control.

REMOTE CONTROL FUNCTIONS

CONTROL PANEL FUNCTIONS

CONTROL PANEL

Figure  4

Figure  5

THE REMOTE CONTROL FEATURES WORK SEAMLESSLY

WITH THE CONTROL PANEL FEATURES.

DOWNLIGHT-

 The DOWNLIGHT button turns the 

downlights on and off that illuminate inside the 

firebox.

FLAME-

 Each time the FLAME button is pressed, the 

intensity of the flame decreases. There are five 

brightness levels you can cycle through including the 

OFF setting.

The remote transmitter must be aimed towards the 

front of the fireplace. If the remote transmitter is not 

working, please replace the batteries with new ones.