Clarity Bay Cat X SN-4620-1080 Manuel D’Utilisation

9

2.2 Installing the Bay Cat X Wall Bracket

The wall bracket comes with each Bay Cat X. See pic-

ture in “You Should Have These Accessories” on page 3.

Using hardware you supply, bolt or screw the wall 

bracket to a wall. Be sure to bolt or screw to structural ele-
ments of the wall, not just the wall board or drywall. The 
Bay Cat X weighs 73 lbs. (33 kg). The mounting method 
you use must be capable of holding five times this weight 
(356 lbs., 160 kg). The mounting holes are on 6.26" cen-
ters. When installed, the wall bracket protrudes 0.375" from 
the back panel of the Bay Cat X.

The Bay Cat X needs no space to the rear for ventilation. 

However, like all electronic devices, it does produce some 
heat. The space above the display should provide enough 
space so that heated air can get away. This means you 
should not mount it into a sealed space with nowhere for 
the heated air to escape. 

The wall bracket always mounts the same way, whether 

the displays will be hung as portrait or landscape. The 
hooks on the wall bracket should always have the open part 
facing upward. 

✎

The Locking Wall Bracket does not have the 
large back plate. It consists of the square, open 
box with the locking mechanism. This Locking 
Wall Bracket with CATLOCK™ is a standard 
accessory. 

For array mounting guidelines, contact 

Clarity Visual Systems.

✎

This space at the rear of the Bay Cat X will 
be occupied by the wall bracket when the 
display is hanging on a wall.