Clarity Bay Cat X SN-4620-1080 Manuel D’Utilisation
30
3.2.4 Adjusting Levels for Video Sources
Video sources are adjusted best if a color bar test pattern is available from the video source: the DVD or VCR
player. If not, you will have to adjust by eye and the “feel” of the picture.
player. If not, you will have to adjust by eye and the “feel” of the picture.
Adjusting the picture
1. Select a video source in the Picture menu.
2. Press
LEVEL
on the remote.
✎
These controls are also used for analog sources
when you chose YPbPr Colorspace.
when you chose YPbPr Colorspace.
Now you have two choices.
• Adjust using any picture from the video source.
• Adjust using a standard color bar pattern from the
source.
Adjusting with color bars
1. If possible, use a color bar pattern from the video
source you will use for the program material. You can-
not use the color bar from the Test Patterns menu.
not use the color bar from the Test Patterns menu.
2. In the Main Menu > Picture > Input Levels menu,
check Blue Only. You should see only the alternate
color bars, all of them blue.
color bars, all of them blue.
3. Adjust Saturation to make the outer two color bars
match. Match them in brightness; they will already
match in color.
match in color.
4. Adjust Hue to make the inner two color bars match.
5. Uncheck Blue Only
✎
When a video source is selected, Auto Setup
Options is not available. Adjustments must be
made manually.
Options is not available. Adjustments must be
made manually.
6. If the color bar pattern has a pluge, you can use it to
adjust Brightness.
Adjusting with any picture
This procedure must be done after you adjust color bal-
1. Choose pictures that have blacks and whites repre-
sented as well as a variety of colors.
2. Adjust Contrast, Brightness, Saturation and Hue on one
Bay Cat X until it looks satisfactory.
Pluge
Adjust Brightness so you cannot see
the different between these two
marks,
the different between these two
marks,
but you can see the difference
between these two marks.
between these two marks.