FIC A360 Manuel D’Utilisation

 

Maintenance & Disassembly 

2.  Remove four screws of frame HDD bracket plate. Two ones of them are at the same side, 

and others are at the other sides. 

 

 

 

 

5.5.5  Removing the LCD Panel  

The procedure for removing the LCD Panel is as follows: 
 
1.  Follow the steps above in removing the keyboard cover.  
 
2.  You will find the LCD panel connector with a cover attached to the system unit using two 

screws. Remove the screws of the cover and pull out the FPC connector. 

 

 

 

 

3.  There are four screws securing both LCD hinges to the system unit. Two screws are at the 

rear side of notebook, and the other two screws are at the under side. Remove the screws 
to separate the LCD panel from the system unit.  

 

 

Two 
screws 

Two 

screws 

 

4.  Slowly pullout the LCD panel from the system unit. 

 
FIC A360 Service Manual 5-9