Chauvet OBEY DMX512 Manuel D’Utilisation
D E L E T E A L L C H A S E P R O G R A M S
CAUTION! This procedure will result in irrevocable loss of chase step memory. The individual
scenes and program banks will be preserved.
Action
1)
Press and hold the BANK DOWN button
and the AUTO DEL button while turning
OFF the controller.
and the AUTO DEL button while turning
OFF the controller.
Notes
Playback (Scenes)
M A N U A L R U N S C E N E
When power is first turned ON, the controller will be in manual scene mode.
Action
1)
Make sure neither MUSIC TRIGGER nor
AUTO TRIGGER LED's on the LED display
are on.
AUTO TRIGGER LED's on the LED display
are on.
2)
Select the program BANK that stores the
scene you want to run manually by using
the BANK UP/DOWN.
scene you want to run manually by using
the BANK UP/DOWN.
3) Press
the
SCENE button to run.
Notes
If you are in programming mode you can also press
and hold the PROGRAM button until the Program
LED goes off.
and hold the PROGRAM button until the Program
LED goes off.
R U N N I N G I N S O U N D - M O D E
Action
1) Press
the
MUSIC/BANK-COPY button until
the MUSIC TRIGGER LED turns on.
2) Change
BANK programs by using BANK
UP/DOWN buttons if necessary.
3) Press
the
MUSIC/BANK-COPY to exit.
Notes
In the Sound mode, programs will be triggered by the
sound using its built-in microphone. All scenes in a
Bank will chase.
sound using its built-in microphone. All scenes in a
Bank will chase.
R U N N I N G I N A U T O - M O D E
Action
1)
Press and hold the AUTO DEL button until
the AUTO TRIGGER LED turns on.
the AUTO TRIGGER LED turns on.
2) Change
BANK programs by using BANK
UP/DOWN buttons if necessary.
3)
You can override the time between steps by
moving the SPEED fader and the fade time
of the step by moving the FADE TIME
fader. To revert to the programmed values,
press the PROGRAM button once.
moving the SPEED fader and the fade time
of the step by moving the FADE TIME
fader. To revert to the programmed values,
press the PROGRAM button once.
4)
You can change Banks while in operation
by using the BANK UP/DOWN buttons.
by using the BANK UP/DOWN buttons.
Notes
In the Auto mode, programs will be triggered by
controllers fade and speed time as set on the faders.
All scenes in a Bank will chase.
controllers fade and speed time as set on the faders.
All scenes in a Bank will chase.
CAUTION! The fade setting should never be slower
than the speed setting or the scene will never
complete execution.
than the speed setting or the scene will never
complete execution.
B L A C K O U T
The Blackout button brings all lighting output to 0 or off (also called the home position of the unit).
Obey™-40 User Manual
15
Revised: 2008-06-13 15:54:24