Castelle Office Direct OfficeDirect Storage Server Manuel D’Utilisation

4

S

TORAGE

 S

ERVER

 U

SER

’

S

 G

UIDE

There are six status LEDs on the front panel:

To reset, press and hold until you hear 1 beep, 

The password will be cleared, and its IP Address set 
to the default value of 192.168.0.2, with a Network 
Mask of 255.255.255.0

When connected to a hub, this button should be UP.

If connecting directly to a PC or Macintosh via 
Ethernet, depress this button.

Use this to connect the Storage Server to your 
10BaseT or 100BaseTX hub.

This will be ON if the LAN connector is using 
100BaseTX.

This will be ON if the LAN connector is using 
10BaseT.

Standard parallel printer port. A printer connected 
here becomes a "network printer."

Normally ON.
This blinks during Startup or Shutdown, and turns OFF after 
the shutdown is completed.

Normally OFF. 
However, it will be On during the power-on self test. Once 
the self-test is completed, it will turn OFF. If it stays ON, 
there is a hardware error.

During a software upgrade, both the Ready and Alert LEDs 
will blink.

Normally OFF.
Blinking indicates the Storage is 98% full.
ON indicates the Storage is completely full.

Flashes during normal operation, when the Hard Disk is 
accessed.

Flashes during normal operation, when data is transmitted or 
received via the LAN.