Axis International Marketing 2130R PTZ Manuel D’Utilisation

In certain circumstances, it may be necessary to reinstate the Factory Default settings for 

your AXIS 2130. This is performed in one of two ways:

• By clicking the 

Factory Default button on the General Settings admin page. This will 

reset most of the unit’s parameters but will save the IP address, the Subnet mask, the 
Default Router and the Mac (Ethernet) address. 

• By pressing the 

Reset Button, located on the underside of the unit. This option will reset 

ALL the parameters currently configured in the unit. To reset the unit using the reset 

button, please see Reinstating the Factory Default Settings, on page 20.

Click the Network Settings button to display, edit and refine the settings for:

•

TCP/IP - used by the camera for transmitting data over the network.

•

DNS (Domain Name System) - the network service used by the product for translating 

domain names into IP addresses. 

•

SMTP (E-mail) - this is the protocol for sending e-mail messages between mail servers on the 
network. 

•

Miscellaneous - set the network media and to restrict the bandwidth used by the product.

Configure the Network Settings with reference to the on-line help and the table below:

DHCP

Enable DHCP to allow centralized assignation of IP addresses. Requires a DHCP server on the network.

BOOTP

Enable the BOOTP protocol for setting the IP address automatically. For further information on using 
BOOTP, see Other IP Setup Methods, on page 23. If you intend to use the AXIS IP Installer, BOOTP must be 
enabled.

IP address

Specifies the unique 32-bit IP address of your unit. 

Default Router

Specifies the network router your video server will use.

Subnet Mask

If unsure what value to use, contact your system administrator.

Host Name

If you are using a DNS server on your network (see below), this is usually the same as the assigned DNS 
Name. 

Domain Name

Enter the name of the domain your AXIS 2130 belongs to.

Primary DNS

Defines the IP address of the primary DNS server. This is used for identifying a computer by name instead 
of IP address.

Secondary DNS

The IP address of the secondary DNS server. This will be used if the primary DNS server is unavailable.

Primary Mail Server

Defines the server that provides your mail facilities.

Secondary Mail Server

Defines a secondary server that can provide mail facilities in the event of the primary server being 
unavailable.

Return Email Address

The reply address for e-mails sent by the AXIS 2130; that is, the name that will appear in the ‘From’ field 
of the dispatched email.