Avital 4103 Manuel D’Utilisation
32
© 2008 Directed Electronics. All rights reserved.
Operating settings learn routine
The System Features Learn Routine dictates how the unit operates. The
programmable operating settings of this unit can be changed when-
ever necessary through the computer-based Learn Routine. The Program
push-button switch, plugged into the blue port, is used together with a
programmed transmitter to change the settings. It is possible to access
and change any of the feature settings using the Program switch. To
program settings, remember: Key, Choose, Transmit and Release.
To program the learn routine:
programmable operating settings of this unit can be changed when-
ever necessary through the computer-based Learn Routine. The Program
push-button switch, plugged into the blue port, is used together with a
programmed transmitter to change the settings. It is possible to access
and change any of the feature settings using the Program switch. To
program settings, remember: Key, Choose, Transmit and Release.
To program the learn routine:
1.
Key.
Turn the ignition on and then back off.
2. Select menu. Press and hold the Program switch.
When the LED flashes once and the horn honks,
Menu One has been selected. Continue to hold
When the LED flashes once and the horn honks,
Menu One has been selected. Continue to hold
the switch until the LED flashes twice and the horn honks twice. Menu
Two has now been selected. Release the Program switch after the
desired Menu choice has been selected.
Two has now been selected. Release the Program switch after the
desired Menu choice has been selected.
3.
Choose.
Within 10 seconds, press and release
the Program switch the number of times correspond-
ing to the feature number you want to program.
(See Features Menu section.)
ing to the feature number you want to program.
(See Features Menu section.)
Once the Program switch has been pressed and released the desired
number of times, press it once more and
number of times, press it once more and
HOLD
it. After a second,
the LED will flash to indicate which feature you have accessed. For
example, groups of eight flashes would indicate access to the status
output feature (Feature 8).
example, groups of eight flashes would indicate access to the status
output feature (Feature 8).
4.
Transmit.
The transmitter is used to select the
desired setting. As shipped, the unit is configured