Avaya Bogen Universal Paging Access Module Manuel De Montage
[22]
Typical Installation: Connecting the UPAM to an Amplifier’s
Hi-Z AUX Input
You can connect the UPAM to an amplifier's Hi-Z input by using the LUWMT1A
transformer (included) to match the UPAM output to the amplifier input (see Figure
8). Make sure the LUWMT1A is set for line level operation (see the instructions
included with the transformer for connection details).
transformer (included) to match the UPAM output to the amplifier input (see Figure
8). Make sure the LUWMT1A is set for line level operation (see the instructions
included with the transformer for connection details).
1.
Make sure that the amplifier is turned off or unplugged.
2.
Connect PT terminal of the UPAM to one of the outside screw terminals on the
LUWMT1A.
LUWMT1A.
3.
Connect PR terminal of the UPAM to the other outside screw terminal on the
LUWMT1A.
LUWMT1A.
4.
Plug the RCA-type connector from the LUWMT1A transformer into the amplifier's
Hi-Z input. Adapters are included in the kit for connecting to 1/4" phone and mini-
jack inputs.
Hi-Z input. Adapters are included in the kit for connecting to 1/4" phone and mini-
jack inputs.
5.
Connect any background music source to BGM IN jack (RCA-type) on UPAM.
6.
Connect speaker loads to the amplifier's output terminals, if necessary.
7.
Turn amplifier volume control counterclockwise to minimum.
8.
Turn amplifier on.
9.