Avaya 38DHB0002UKDD Manuel D’Utilisation

Page 132 - Troubleshooting 

Appendix D: Use Of The Serial Port 

If the response fails because the configuration file is unavailable, e.g.: 

: Received BOOTP request for 00e007000123 192.168.42.1 IPNC.bin 
: Sending BOOTP response for 00e007000123 192.168.42.1 IPNC.bin 
: Unable to send IPNC.bin length 0 bytes 

Copy the IPNC.bin file from the Admin CD \bin folder into the Manager’s folder 
(that folder shown on the Manager’s title line) and then power the base unit off 
and on again. 

If the response fails because the identity details are incorrect, e.g.: 

: Received BOOTP request for 00e007000123 192.168.42.1 IPNC.bin, unable 
to process 

Use File/Bootp and add or edit an existing entry with the MAC and IP address 
details displayed. (This form is normally completed automatically when a unit is 
upgraded from the Manager.) 

Example of serial port traces as the base unit boots are as follows. 
1. Factory default configuration 

Factory Test Status ffffffff 
Product Variation Status ffffffff 
NVConfiguration:: No NV Stored default.. 
ISDN PRI Added 
Dual-Modem fitted 
Route::Attempting DHCP... 
TDMLink 2 Online 

Route::No DHCP defaulting IP Address c0a82a01 ffffff00 
RouteSystem::Starting DHCP Server... 
RouteSystem::RouteSystem LAN1 ipaddr=c0a82a01 ipmask=ffffff00 
Configuration::Attempting to read from FLASH... 
Configuration::Using Default... 
No System IPADDR using DISCOVERED Values 
No System IPADDR 2 using DISCOVERED Values 
Platform::Discover TDM Attached Units... 
Platform::Discover Possible LAN Attached Units... 
Configuration::WARNING Unit IPNC is not configured – adding 
Adding RemoteManager route to 192.168.99.0 
Configuration::AddDeadRoute 0a000000 ff000000 00000000 

Configuration::AddDeadRoute e0000000 ff000000 00000000 
Configuration::AddDeadRoute c0a80000 ffff0000 00000000 
Configuration::AddDeadRoute ac100000 fff00000 00000000 
Configuration::Complete 
CallSystem::NEW LINE Detected 1 
SNMP::Starting SNMP Server... 
MIBII::Creating MIBII base... 
Initialisation complete starting TA 

2. Actual configuration 

Factory Test Status ffffffff 
Product Variation Status ffffffff 
Dual-Modem fitted 
RouteSystem::Starting DHCP Server... 
RouteSystem::RouteSystem LAN1 ipaddr=c0a82a01 ipmask=ffffff00 
Configuration::Attempting to read from FLASH... 
No System IPADDR 2 using DISCOVERED Values 
Platform::Discover Possible LAN Attached Units... 
Configuration::Complete 
SNMP::Starting SNMP Server... 
MIBII::Creating MIBII base... 
Initialisation complete starting TA 

Page 132 - Appendix D: Use Of The Serial Port 

INDeX IPNC Cassette Administration Manual 

Troubleshooting 

38DHB0002UKDD – Issue 7 (22/11/02)