Avaya 38DHB0002UKDD Manuel D’Utilisation

Page 78 - Part 1 IP Connectivity 

How Do I? 

These configuration examples provide for IP connectivity between two sites using 
X21, V34 lease line point-to-point circuits. Two examples are given:- 

• 

Quick WAN Set-up (No Authentication) 

• 

Advance WAN set-up (CHAP Authentication) 

The Quick and Advance WAN examples provide the same level of IP connectivity 
that may be modified to interoperate with 3

rd

 party routers (see page 88). Both 

examples are suitable for VoIP (see page 89 for more information on VoIP 
configuration). 

The quick set-up avoids the use of separate incoming/outgoing account names 
and password. Use a common Service Name, Service Account Name and 
passwords on both Unit 1 and Unit 2. 

Network PCs 

Network PCs 

192.168.200.1/24 192.168.50.1/24

 

 

Step 1 
Attach the WAN cable to Unit1 and Unit2 and 
reboot. 

 
It is important that, when a new WAN device is 
created in the configuration, the IPNC is re-booted 
with the WAN cable attached. 
Note:   Do not attempt to manually create a WAN 

device. 

Step 2 
Obtain configuration files  

 
Obtain configuration file only after the IPNC has been 
rebooted with WAN cable attached (see The File 
Menu on page 25). 
 

Step 3 
Configure the System/LAN1 with the IP 
address of Unit1 and Unit2 as follows: 
Unit 1 
System/LAN1 

•  IP Address = 192.168.200.1 
•  IP Mask = 255.255.255.0 

Unit 2 
System/LAN1 

•  IP Address = 192.168.50.1 
•  IP Mask = 255.255.255.0 

 

 
See The System Configuration on page 35. 

Page 78 - How Do I? 

INDeX IPNC Cassette Administration Manual 

Part 1 IP Connectivity 

38DHB0002UKDD – Issue 7 (22/11/02)