ArtDio IPC 1000 Series Manuel D’Utilisation

 

 

 

   

32

1. 

Pick up the phone, listen for dial tone, dial ##9999 after hearing confirmation response of two 

beeps: 

2. 

Record greeting 1, dial 991* Æ begin recording, dial # Æ when recording is finished 

3. 

Save greeting 1 recording, dial 9# Æ dial # after hearing confirmation response of two beeps 

4. 

Record greeting 2, dial 992* Æ begin recording, dial # Æ when recording is finished 

5. 

Save greeting 2 recording, dial 9# Æ dial # after hearing confirmation response of two beeps 

6. 

Record greeting 3, dial 993* Æ begin recording, dial # Æ when recording is finished 

7. 

Save greeting 3 recording, dial 9# Æ dial # after hearing confirmation response of two beeps 

8. 

Record greeting 4, dial 994* Æ begin recording, dial # Æ when recording is finished 

9. 

Save greeting 4 recording, dial 9# Æ dial # after hearing confirmation response of two beeps 

10.  Record greeting 5, dial 995* Æ begin recording, dial # Æ when recording is finished 

11.  Save greeting 5 recording, dial 9# Æ dial # after hearing confirmation response of two beeps 

NO TWO ACCESS CODES CAN HAVE IDENTICAL DIGITS! Please regard this 

requirement when setting access codes. It is recommended to review set access codes when setting 
or re-setting a code to avoid a conflict or malfunction. 

A barring class is used to specify which numbers can or cannot be dialed. Every barring class 

element includes the following information: There are six barring classes on the device and all 

extensions can be assigned to any class. Initially they are all unassigned and have no association 

with any gateways in the group.   

The name of class 

Class Attribute   

The class attribute can be set to either “Deny” or “Accept”. Both attributes have a barring table 

and an exception table. Each class contains only one attribute.   

Attribute Meaning 

Barring table: 

 

Exception table: 

Denies all numbers except those specified in the 

exception table. The barring table does not need to have 

elements because “Deny” in general is used to bar all 

numbers except those found in the exception table. 

Barring table: 

 

Exception table: 

Accepts all numbers except the numbers listed in the 

barring table. However the numbers specified in the 

exception table should not be barred.