Apex Tool Group Boat A-24 RIB Manuel D’Utilisation
- 11 -
www.apexinflatables.com
FLOORS, TRANSOMS
For fully collapsible models, floors are generally made from wood or
aluminum. The wood must be marine grade. Some wood floors are
varnished. This may have a nice appearance when new, but can create
more maintenance afterwards.
APEX boats are made with marine grade plywood transoms and floors
protected by 2 layer of 2 components epoxy barrier and then a layer of
polyurethane. We use a light Grey paint to better resistance to fading under
UV.
ROLL UP TECHNOLOGY
Certain manufacturers, including APEX, have models, which allow the boat
to be rolled with the floor in place, and to have an inflatable keel. These
models usually have a hinged, segmented floor that combines rigidity for
performance and stability with ease of handling and storage. Do not confuse
these floors with slatted floors, which are not full-length floors. Such floors
cannot compare with roll up floors for rigidity, stability and performance, and
do not allow for a keel. Remember with polyester reinforce fabric the tube
are more rigged and there for the floor is stiffer and stable.