Apex Digital 5708009-C Manuel D’Utilisation
5708009-C
5-7
Apex 1 to 5.5 kW Generator
ODU CONNECTOR
The following section describes the ODU input connector. To determine if your Apex
unit has this connector, use the configuration PIN from your Apex unit and the
following Configuration Note.
unit has this connector, use the configuration PIN from your Apex unit and the
following Configuration Note.
Figure 5-5 shows the ODU input connector. The pin numbers are labeled in the
illustration.
illustration.
Before making any input line power connection, turn off circuit breakers
supplying input power to the Apex generator.
supplying input power to the Apex generator.
Non-standard connectors for input and/or output power must be
inaccessible to the user.
inaccessible to the user.
If your unit does not have a circuit breaker, install and operate it with a
circuit breaker on the ac input to provide over-current protection. The
circuit breaker must have a trip value as specified in the line current
section of Table 3-2. on page 3-5.
circuit breaker on the ac input to provide over-current protection. The
circuit breaker must have a trip value as specified in the line current
section of Table 3-2. on page 3-5.
This section of the manual provides information for the:
ODU input connector
PIN position13, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option A.
(When identifying the PIN position, remember that the A at the beginning of
the PIN is not counted as a position. The PIN option is the number or letter
you should look for in the specified position.)
ODU input connector
PIN position13, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option A.
(When identifying the PIN position, remember that the A at the beginning of
the PIN is not counted as a position. The PIN option is the number or letter
you should look for in the specified position.)
For more information about the PIN and for a complete list of how PIN
positions correspond to Apex product options, see Table 1-1. on page 1-4.
positions correspond to Apex product options, see Table 1-1. on page 1-4.