Ampro Corporation Littleboard 550 Manuel D’Utilisation

Page de 100
Chapter 2
Product Overview
LittleBoard 550
Reference Manual
19
Power Specifications
Table 2-8 shows the power requirements for the LittleBoard, including the I/O interface board.
Table 2-8.  Power Supply Requirements
Parameter
300MHz Characteristics
533MHz Characteristics
1GHz Characteristics
Input Type
Regulated DC voltages
Regulated DC voltages
Regulated DC voltages
In-rush* Current
(Typical)
26.9Amps (134.5W)
20.6Amps (103W)
25.9Amps (129.5W)
BIT** Current
(Typical)
1.98Amps (9.92W)
2.51Amps (12.55W)
2.84Amps (14.21W)
Notes: *In-rush measured with video, 64MB memory, and power connected.  **The BIT (burn in test)
current was derived with 64MB SDRAM, (1) floppy, (1) IDE HDD, (1) on-board 64MB CompactFlash,
I/O Interface board, (2) serial ports w/loopbacks, (1) externally-powered USB CD-ROM, (1) externally-
powered USB HDD, (1) external USB Jump-drive (key-chain CompactFlash type), (1) external USB
CompactFlash Reader with 64MB CompactFlash card, and (2) Ethernet channel connections using
Win2k OS.
Environmental Specifications
Table 2-9 provides the most efficient operating and storage condition ranges required for this board.
Table 2-9.  Environmental Requirements
Processor
300MHz Conditions
533MHz Conditions
1GHz Conditions
   Operating
 +0
° to +70°C
 (32
° to +158°F)
 +0
° to +70°C
 (32
° to +158°F)
+0
° to +70°C
 (32
° to +158°F)
   Extended
       (Optional)
 -40
° to +85°C
 (-40
° to +185°F)
 -40
° to +85°C
  (-40
° to+185°F)
-40
° to +85°C
  (-40
° to +185°F)
Temperature
   Storage
 –55° to +85°C
 (–67
° to +185°F)
 –55° to +85°C
 (–67
° to +185°F)
 –55° to +85°C
 (–67
° to +185°F)
   Operating
5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
Humidity
   Non-operating
5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
Thermal/Cooling Requirements
The CPU, Northbridge, Southbridge, and voltage regulators are the sources of heat on the board.
The LittleBoard 550 is designed to operate at its maximum CPU speed of 300MHz, 533MHz, or
1GHz.  All processors and the northbridge require a heatsink, but no fan is required.