Ambir Technology PS467 Manuel D’Utilisation

 

 

- 8 -

 
This calibration process will require the special black and white calibration 
sheet that was included with your scanner. When calibrating, make sure the 
page with the black bars are facing down and note the direction of the arrows 
for proper insertion. When the calibration process has been completed 
successfully, you will see the message above; otherwise you would need to 
re-calibrate. 

 

If you switch scanners or your image quality has become unsatisfactory, you 
can first clean your scanner with the provided cleaning sheet, and then 
re-calibrate your scanner. To calibrate the scanner simply click the Custom 
button in the AmbirScan 2.0

window and select Calibrate. 

 
Should you lose the calibration paper that was included with your scanner, you 
can simply use any plain “white” (the brighter the “white” the better) piece of 
letter size printer paper and cut it to a dimension of (4 1/8 x 7 1/4) to perform 
the calibration. The following message will be displayed.