AllTrade BAR916HG Manuel D’Utilisation

EN

11

Temp

°C / °F

Channel

If  you  are  using  more  than  one 
sensor, select a different channel 
for each sensor

Radio  Signal 
Format

EU (DCF) / UK (MSF)

The  RTGR328N  Sensor  collects  temperature  and 
humidity readings, and signals from official time-keeping 
organizations for the radio-controlled clock. 

1.  Open the battery compartment with a small Phillips 
 

screwdriver.

2.  Insert the batteries.
3.  Set  the  channel  and  radio  signal  format.  The   
 

switches are located in the battery compartment.

4.  Press RESET. Then set the temperature unit.

5.  Close the battery compartment.

1

2

For best results:
•  Insert the batteries and select the unit, channel, and  
  radio signal format before you mount the sensor.
•  Place the sensor out of direct sunlight and moisture.
•  Do  not  place  the  sensor  more  than  70  metres   
  (230 feet) from the main (indoor) unit.
•  Position  the  sensor  so  that  it  faces  the  main   
  (indoor) unit, minimizing obstructions such as doors,  
  walls, and furniture.
•  Place the sensor in a location with a clear view to the  
  sky, away from metallic or electronic objects.
•  Position the sensor close to the main unit during cold  
  winter  months  as  below-freezing  temperatures  may   
  affect battery performance and signal transmission.

NOTE   The transmission range may vary and is subject 

to the receiving range of the main unit.

You may need to experiment with various locations to 
get the best results.

BAR916HG_EN_OP.indd   11

5/8/06   11:23:21 AM