Allied Telesis Network Cables AT-MC606 Manuel D’Utilisation

Overview

38

The AT-MC606 Provider unit can either be installed in an AT-MCR12 
rackmount chassis, or used as a desktop device, or mounted onto a wall. 

To prevent exposure to electric shock, the AT-MC606 Provider Unit 
must be installed in a RESTRICTED ACCESS LOCATION and 
performed by QUALIFIED SERVICE PERSONNEL.

For Finland, Norway, and Sweden – When the AT-MC606 
Ethernet Extender and the AT-MCR12 rackmount chassis are used, 
a permanent ground conductor must be installed on the AT-MCR12 
rackmount chassis. For installation instructions of this ground 
conductor, the AT-MCR12 Media Converter Rackmount Chassis 
Installation Manual is available in portable document format (PDF) 
on our web site at www.alliedtelesis.com. Go to “Where to Find 
Web-based Guides” on page 13 for instructions to navigate to this 
documentation.

To use the Provider unit on a desktop, perform the following procedure:

1. Remove all equipment from the package and store the packaging 

material in a safe place. 

2. Attach the four protective feet (provided) to each corner of the bottom 

of the unit, as illustrated in Figure 12.

.

Figure 12. Attaching Protective Feet

1932

VDSL EXTENDED ETHERNET