Advantek Networks AWN-USB-54S Manuel D’Utilisation

Page de 43
 
41 
Possible Remedy: 
Move the antennas of the access point or wireless router into an L shape (one vertically, 
and  one  horizontally).  Click  on  the  Refresh  button  on  the  Site  Survey  screen.  If  the 
computer  still  does  not  see  the  Access  Point,  and  then  try  to  move  your  Access  Point 
closer to the computer. Then click on the Refresh button again. If the computer still does 
not  see  the  Access  Point,  move  all  things  that  may  cause  interference  with  the  wireless 
signal. 
 
8.  Symptom: 
If you still cannot get a wireless connection of the network. 
Possible Remedy: 
Step 1- Turn the computer off   
Step 2- Turn the Access Point off   
Step 3- Turn the Access Point on   
Step 4- Wait 30 seconds   
Step 5- Turn the computer back on 
Step 6- Using the Utility reconnect to the Access Point:   
Step 7- Double click on the bar graph icon in the system tray   
Step 8- Select the Site Survey Link   
Step 9- Highlight the SSID of your wireless network and click connect   
Step 10- Click OK if all the settings are correct 
 
9.  What is the IEEE 802.11g standard? 
802.11g  is  the  new  IEEE  standard  for  high-speed  wireless  LAN  communications  that 
provides for up to 54 Mbps data rate in the 2.4 GHz band. 802.11g is quickly becoming the 
next  mainstream  wireless  LAN  technology  for  the  home,  office  and  public  networks. 
802.11g  defines  the  use  of  the  same  OFDM  modulation  technique  specified  in  IEEE 
802.11a for the 5 GHz frequency band and applies it in the same 2.4 GHz frequency band 
as IEEE 802.11b. The 802.11g standard requires backward compatibility with 802.11b. 
 
The standard specifically calls for: 
A.  A  new  physically  layer  for  the  802.11  Medium  Access  Control  (MAC)  in  the  2.4  GHz 
frequency  band,  know  as  the  extended  rate  PHY(ERP(.  The  ERP  adds  OFDM  as  a 
mandatory new coding scheme for 6, 12, and 24 Mbps (mandatory speeds), and 18, 36, 48, 
54 Mbps (optional speeds). The ERP includes the  modulation  schemes found in  802.11b 
including CCK for 11 and 5.5 Mbps and Barker code modulation for 2 and 1 Mbps. 
B.  A  protection  mechanism  called  RTS.CTS  that  governs  how  802.11g  devices  and 
802.11b devices interoperate.