ADIC Time Clock 6-00028-01 Rev A Manuel D’Utilisation

6-00028-01 Rev A

Initial Setup Tasks

1-3

Running the installation script created a Backup Volume entry 
in the AMASS File System Database. To prepare media to be 
the specified Backup Volume, perform the steps in the 
following table.

The Backup Volume must be identified as volume number 1 and 
have an INACTIVE status in the AMASS File System 
Database. An INACTIVE status means that AMASS cannot 
read or write to the volume.

AMASS assumes the Backup Volume is in either the first or last 
slot, depending on the library; therefore no slot designation is 
required. If you have more than one library connected to 
AMASS, put the Backup Volume in the last slot in the first 
library. The Backup Volume in network-attached libraries can 
be in any slot so a slot designation is required.

For detailed information on the AMASS commands, see the 
"

Command Reference" 

chapter.

1

Log  in  as 

 or 

.