Manualsbrain.com
  1. Manuels
  2. Marques
  3. ADC
  4. MLN7400
  5. Manuel D’Utilisation

ADC MLN7400 Manuel D’Utilisation

Télécharger
Page de 38
                                                                                                                       
EVB7400 
                                                                                                                                                                 
Chapter 4   
Connection Configurations for Debug Console 
 
4.1    Configuration the Hyper Terminal 
 
To configure the Hyper Terminal, which is a Windows utility program for serial communications, refer to following steps: 
 
1.  Run the Hyper Terminal program 
-. Window 95/98/2000/XP start tool bar -> Program -> Accessories -> Hyper Terminal Group 
    -> Double click Hyperterm.exe -> Enter a connection name -> Select a icon -> Click OK. 
2.  Select COM Port to communicate with EVB7400 board. 
-. Choose COM1 or COM2 as the serial communication port and click OK.   
3.  Set the serial port properties 
-. Bits per second: 57600 bps 
-. Data Bits : 8 bits 
-. Stop Bits : 1 
-. Flow control : None 
 
4.  Select the Properties from the File menu 
 
[Figure 5 ]  P
ROPERTIES 
S
ETTING 
P
AGE
 
5. Choose 
Setting 
Page. 
User’s Manual V.0.10                                                                                                                                   15/36  
 
Copyright © 2004 MCS LOGIC Limited. All rights reserved