Drill Masters Eldorado Tool Welder 93420 Manuel D’Utilisation
SKU 93420/93421
For technical questions please call 1-800-444-3353. Page 2
T
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________
Serial No.___________ Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read
the entire manual to become familiar with the unit BEFORE you begin assembly.
the entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
The M3 High speed steel cutting edge is electronic beam welded to an alloy steel body for tougher
and longer lasting teeth. Alternate tooth set for smoother and faster cuts with better chip clearance.
The bi-metal construction provides durability and long life. Heat vents for cooler running.
135 degree split point Pilot bit for better penetration and to prevent skating.
and longer lasting teeth. Alternate tooth set for smoother and faster cuts with better chip clearance.
The bi-metal construction provides durability and long life. Heat vents for cooler running.
135 degree split point Pilot bit for better penetration and to prevent skating.
Each kit contains 6 Hole Saws, 2 Pilot Bits, 2 Mandrels and a Mandrel Adapter. For Hole Saw sizes
see the listing on page 4.
see the listing on page 4.
Maximum RPM:
Maximum drill speeds for various types of material - see chart on page 6.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Keep work area well lighted.
3.
Store idle equipment. When not in use, the Hole Saws must be stored in a safe and clean
location. Always lock up products and keep out of reach of children.
4 .
Use the right product for the job. There are certain applications for which the Hole Saws
were designed. Do not modify the Hole Saws and do not use the Hole Saws for a purpose for
which they were not intended.
which they were not intended.
5. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
6.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
7.
Do not operate product if under the influence of alcohol or drugs. Read warning labels on
prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there
is any doubt, do not operate the product.
is any doubt, do not operate the product.