Ditch Witch Welder PR95 Manuel D’Utilisation

Change air filter as needed. 

1.

Disengage clasps (2) and remove end cup.

2.

Remove primary element (3).

3.

Remove secondary element (4), if dirty.

4.

Wipe inside of housing and wash end cup.

5.

Install new element(s). 

6.

Install end cup and engage clasps.

7.

Reset air filter service indicator (1).

1.

Turn off engine and remove key.

2.

Apply moderate thumb pressure to belt 
between pulleys, as shown.

3.

Belt is properly tensioned when deflection is 
about 1/4-3/8” (7-9 mm).

4.

If needed, loosen alternator bolts (shown) and 
pull alternator out until correct tension is 
reached.

5.

Tighten alternator bolts.