Dialogic IP Phone 05-2239-009 Manuel D’Utilisation

441

Dialogic Corporation

initialize IP_VIRTBOARD data structure

„ Description

The INIT_IP_VIRTBOARD( ) function is used to initialize an 

 data structure, 

which contains configuration data for a specific virtual IPT board. This function must be called to 
initialize an IP_VIRTBOARD structure for each virtual board that will be defined by calling 

 before calling gc_Start( ). 

After the structure is initialized, an application can overwrite any of the defeat values as 
appropriate to the specific requirements. Among the items controlled by the IP_VIRTBOARD 
structure and initialized by this function are:

maximum number of calls (total, H.323, and SIP) 

local IP address and signaling ports for H.323 and SIP

H.323 Terminal Type (default is Gateway)

enable access to H.323 message information fields (default is disabled)

enable call transfer supplementary service (default is disabled)

enable access to SIP message header fields and MIME-encoded message bodies (default is 
access disabled for both headers and MIME bodies)

enable and configure a SIP outbound proxy (default is disabled)

enable and configure TCP transport for SIP requests (default is disabled)

configure SIP request retry behavior (default enables all allowable retries)

enable application access to SIP OPTIONS requests (default is disabled)

configure maximum number of SIP registrations (default equals max. number of SIP calls)

„ Cautions

None.

void INIT_IP_VIRTBOARD(pIpVb)

IP_VIRTBOARD *pIpVb

pointer to the structure to be initialized

None

gcip.h

synchronous

pIpVb

points to the IP_VIRTBOARD data structure to be initialized. See 

, on page 553, for information on the default values and 

optional values that may be after initialization.