Digi Tech DigiTech Telephone C0408 Manuel D’Utilisation

The Analog Terminal Interface 

 device is an optional accessory available for use with the digital telephone system.

Connect it to a station port to

 interfacing for such external telephony equipment as an ExecuMail system, an industry-standard model 2500 tone dial telephone, a model 500

 dial telephone, etc.

Perform the following programming actions as necessary when operating external equipment through the 

 device.

When ExecuMail Is included with the
system, use this programming feature
to arrange for a immediate line transfer
without delay from ExecuMail to a
station port.

 Mall Llne ID:  When ExecuMail

is included with the system, program
the lines with identification (ID)

numbers. These numbers allow the
ExecuMail system to identify which line
it is answering. The ID numbers that
are assigned here must match the ID
numbers that are selected as part of

ExecuMail system programming.

1. Dial 25

  MAIL AUTO 

2. Press  Al  to toggle between enable and disable.

(LED On   Enable)

Dial  1  to enable.
(Al LED is on)
Dial 2  to  disable.

3. Dial 

 for configuration mode

1. Dial 43.

2. Select line port (LED On = Line assigned)

Line 

 1-14   Dial  01   14  or Press  Al   Al4

Line port 15, 16   Dial 

  or press 

Line port 17-24 = Dial 17   24

Press  HOLD  then press  Al   A8

3. Dial #to clear current ID.
4. Dial ID number (8 digit maximum).
5. Dial 

 for further ID assignment.

Dial 

 

 for configuration mode.

REFERENCE RECORD