Digi Tech DigiTech Telephone C0408 Manuel D’Utilisation
System
66-083
SECTION 2
STATION OPERATION
The attendant station provides additional operating features that are not available from other stations in the
system.
SYSTEM CLOCK
The system clock can be programmed to maintain
current date and time information . This information is
provided to the LCD speakerphone for display.
current date and time information . This information is
provided to the LCD speakerphone for display.
1. Press ITCM.
2.
1 . .
3 . Dial two digits (00-99) for yr.
4. Dial two digits (01-12) for mo.
5. Dial two digits (01-31) for day.
6. Dial two digits (00-23) for hr.
7. Dial two digits
for min.
8. Press MNTR (SPKR) to end.
SYSTEM SPEED DIAL PROGRAMMING
A special system-wide list of numbers can be
programmed for automatic dialing by all users.
1.
2.
3 .
5 .
Press
Dial # 0 2.
Dial 01 99 to chose storage location.
Dial #to clear current entry.
Choose line to be used:
l
Dial 90 for no line assignment (system will
choose last line used at calling station or prime
line if one is assigned to calling station).
l
Press buttons Al Al4 for lines 1-14 or dial 01
14.
l
Press buttons
, B2 for lines
or dial 15,
16.
l
Press HOLD then press buttons Al A8 for
lines 17 24 or dial 17 24.
lines 17 24 or dial 17 24.
l
Dial 91 94 for line groups 1 4.
l
Press
for intercom line.
6 . Dial the number to be stored (32 digits maximum).
l
Press HOLD to store pause
required).
l
Press TAP to store flash (if required).
7. Press
to save number.
8 . Repeat steps 3 7 to store next number.
9. Press MNTR (SPKR) to end.
NIGHT TRANSFER (of ringing)
The day, or normal, ringing assignments of incoming
lines can be transferred to a particular station or
stations (these line/station ringing assignments are
chosen through class of service programming) for
off-hour or special-purpose answering. Additionally,
stations can be arranged through class of service
programming, to be able to answer any ringing outside
lines can be transferred to a particular station or
stations (these line/station ringing assignments are
chosen through class of service programming) for
off-hour or special-purpose answering. Additionally,
stations can be arranged through class of service
programming, to be able to answer any ringing outside
line. This line answer from any station action. is also
enabled
enabled
the night transfer (of ringing).
1. Press ITCM.
3. Press Al (top, left-hand programmable button) to
toggle feature on or off. Associated light will turn
on when night transfer is active and turn off when
is inactive.
O R
l
Dial 1 to enable (Al LED turns on).
l
Dial 2 to disable (Al LED turns off).
4. Press MNTR (SPKR) to end.
NOTE: When this feature is on, the
light will
flash.
2. Dial # 0 3.
5-14