Digi Tech DigiTech Telephone C0408 Manuel D’Utilisation
Made
in the USA
TECHNICAL ADVISORY BULLETIN
Date:
January
TAB 099
SOFTWARE ENHANCEMENTS FOR
THE DigiTech DIGITAL TELEPHONE SYSTEM
This bulletin discusses the following software enhancements and feature additions to the DigiTech telephone system:
l
Enhanced SMDA reporting
l
Expanded options for account code entry
l
Support for Caller ID service
Availability of these enhancements is as follows:
BASE UNIT PRODUCT CODE
GO408 All Revisions
GO81 6 All Revisions
GO81 6 All Revisions
All Revisions
SOFTWARE CARTRIDGE PRODUCT CODE
SO408 Rev. 13a and later
SO408 Rev. 13a and later
SO816 Rev. 13a and later
S1632 Rev. 13a and later
S1632 Rev. 13a and later
Note:
.
Due to the addition of a new account code table,
follow these
when
software
the
1. Save current database
2. Install new software
3 .
3 .
Master clear system
4. Restore database
5 .
5 .
Perform additional programming, if desired
FEATURE AND BENEFIT
This section describes the major features and benefits of this software enhancement, including programming information.
FEATURE
SMDA Reporting
Through VDT
Programmlng and
Per-Station SMDA
Per-Station SMDA
BENEFIT
A menu selection has been added so that SMDA reports can now be requested from VDT
programming and can be sent to either port A or port B.
programming and can be sent to either port A or port B.
This feature can be used remotely to
capture SMDA reports; as well, SMDA station reports can now be requested per station. Note,
however, that only one station report can be requested at a time. The Class of Service
programming requirements for SMDA reporting are as follows:
1.
Press
# 7 4 6
to enter COS programming
2 .
Dial 07 for SMDA reports
3. Dial 1 for station reports
4 .
Dial station number and then press
or press # for all stations