Digi Tech DigiTech Telephone C0408 Manuel D’Utilisation
LINE CONFIGURATION
Mark the desired selections in the charts to record programming needs.
Dial the feature code and then dial the selection code or press the programming button to program the selection.
A current program setting is indicated
a lighted LED next to the programming button for that selection.
When a toggle
action is
provided
a
button, the
LED indicates an active feature.
To make a line port selection, press a programming button or dial a selection number on the keypad as follows:
LINE
PROG. BUTTONS
KEYPAD BUTTONS
14
Al Al4
01
17 24
HOLD plus Al A8
17-24
NOTE HOLD button is used to toggle program buttons between lines 1
14 and 17 24.
Llne
Defautt: The line configuration
features, described in the following
procedures, can be defaulted to a
procedures, can be defaulted to a
standard set of values. These values
will provide satisfactory system
will provide satisfactory system
in a broad range of site
“LINE DEFAULT
2. Press # to default line features.
System automatically returns to base level.
Llne
A line port can be taken
out of service because of defect or
2. Select line ports to be disabled
other reason. Return the line to service
(LED On = Disabled).
with the central office lines
Line
1-14 = Dial
01 14 or Press Al Al4
programming procedure.
Line port
= Dial
or press
Line port 17-24 = Dial 17 24
D then press
Al A8.
3 . Dial
for configuration mo