Denon Video Gaming Accessories DN-S1200 Manuel D’Utilisation
Connections
Pla
ybac
ybac
k
Specifications
Basic
Oper
ations
Memo F
unction
Utility
Front Panel
q
w e
r t y
u
i
q
Rear Panel
q
Disc loading slot
Insert CDs here. Insert the CD slowly, then
release it.
q
PS/2 connector
Terminal for connecting a PS/2 keyboard.
w
Analog output terminals (LINE OUT)
• This is unbalanced RCA output terminals.
• Audio signals outputs.
• Audio signals outputs.
e
Digital output terminal (DIGITAL OUT)
• Digital data is available from these terminals.
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
• Use 75 Ω/ohms pin cord for connection.
• We recommend you use braided wire type
shielded cable.
r
D-Link connector
Terminal for connecting another DN-S1200.
Exchange of memo data, keyboard data and
Exchange of memo data, keyboard data and
relay command information is performed with
another DN-S1200.
b
another DN-S1200.
b
Do not connect anything other than a DN-
S1200.
b
Use an RJ45 cross cable no longer than 3
meters for connection.
t
USB B port
• USB MIDI and HID commands are sent from the
DN-S1200 to the computer.
• USB MIDI and HID commands as well as USB
AUDIO signals are received from the computer.
NOTE
The playback level after analog conversion is set
to –6 dB below the usual level to avoid digital
distortion.
to –6 dB below the usual level to avoid digital
distortion.
y
USB A port
Only one mass storage device (USB memory,
USB HDD, etc.) can be connected.
b
b
Not compatible with USB hubs
u
Fader start jack
• Connect the mixer here.
The various fader commands (play, pause, cue,
The various fader commands (play, pause, cue,
etc.) are received from the mixer.
• Use a 3.5 mm stereo mini cord for connection.
i
POWER button
Push this button to turn power on and off.
NOTE
Do not turn off the power while a disc is loading or
ejecting. Doing so could damage the CD mechanism
and lead to malfunction.
ejecting. Doing so could damage the CD mechanism
and lead to malfunction.
Get
ting Star
ting Star
ted